Washdown Gear Motor (6:1 Gear Ratio) (Single-Phase 220/230 VAC)

Product Line: Oriental Motor®

Motor Type: IP67 Rated Washdown Induction

Frame Size: 4.09 in

Output Power:90 W (1/8 HP)

Voltage (VAC): Single-Phase 220/230 VAC

Frequency (Hz):60 50

Current    

0.71 A [230 VAC, 60 Hz]

0.73 A [220 VAC, 60 Hz]

0.81 A [230 VAC, 50 Hz]

0.82 A [220 VAC, 50 Hz]

Gear Ratio (X:1) : 6 :1

Output Shaft Diameter:    18 mm

Type: Cable

Rated Torque    

25 lb-in [60 Hz]  

30 lb-in [50 Hz]  

Rated Speed (rpm)    

250 [50 Hz]

300 [60 Hz]

Permissible Load Inertia: 390 oz-in²

Permissible Overhung Load    

0.39 in. from Shaft End = 123 lb

0.79 in. from Shaft End = 180 lb

Permissible Thrust Load:45 lb

RoHS Compliant:Yes

Safety Standards

UL

CSA

CCC

EN

CE

CE Marking:Low Voltage Directives

Insulation Resistance:100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity.

Dielectric Strength:Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity.

Temperature Rise:144ºF (80ºC) or less measured by the resistance change method after rated motor operation under normal ambient temperature and humidity.

Insulation Class    

Class B (266ºF [130ºC])

Overheat Protection:Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C)

Ambient Temperature Range:14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing)

Degree of Protection:IP67