List of products by manufacturer Loctite

  • Used for bonding a wide range of metals, plastics and elastomeric materials; can be used on rough or irregular surfaces and in applications requiring alignment times up to 15 seconds.

    Used for bonding a wide range of metals, plastics and elastomeric materials; can be used on rough or irregular surfaces and in applications requiring alignment times up to 15 seconds.

  • LOCTITE 420 INSTANT ADHESIVE a single component, general industrial grade cyanoacrylate adhesive; it has a low viscosity for penetrating pre-assembled parts and develops strong bonds

    LOCTITE 420 INSTANT ADHESIVE a single component, general industrial grade cyanoacrylate adhesive; it has a low viscosity for penetrating pre-assembled parts and develops strong bonds

  • The ideal adhesive for porous substrates, LOCTITE® 454 Prism Instant Adhesive is a clear gel. As a surface insensitive cyanoacrylate, it is ideal for difficult-to-bond substrates, including rough, porous and acidic surfaces. Need to bond something on a vertical surface? This gel formulation won’t run off before you put substrates together. ABS approved.

    The ideal adhesive for porous substrates, LOCTITE® 454 Prism Instant Adhesive is a clear gel. As a surface insensitive cyanoacrylate, it is ideal for difficult-to-bond substrates, including rough, porous and acidic surfaces. Need to bond something on a vertical surface? This gel formulation won’t run off before you put substrates together. ABS approved.

  • A general purpose adhesive for difficult-to-bond surfaces.

    A general purpose adhesive for difficult-to-bond surfaces.

  • Low viscosity elastomer-modified instant adhesive. Bonds metals and rubbers. Excellent peel, impact and shear strength. NSF/ANSI 61 Certified for potable water.

    Low viscosity elastomer-modified instant adhesive. Bonds metals and rubbers. Excellent peel, impact and shear strength. NSF/ANSI 61 Certified for potable water.

  • The Loctite 495 Super Bonder Instant Adhesive is a cyanoacrylate adhesive and was designed originally for thread-locking. Presently it has been developed to bond various materials. When Loctite 495 curing time and shelf life are followed accurately, its maximum mechanical parts bonding strength and optimum storage period are achieved respectively. 

    The Loctite 495 Super Bonder Instant Adhesive is a cyanoacrylate adhesive and was designed originally for thread-locking. Presently it has been developed to bond various materials. When Loctite 495 curing time and shelf life are followed accurately, its maximum mechanical parts bonding strength and optimum storage period are achieved respectively. 

  • ?Provides a convenient, cost-effective method to apply product with minimal waste. Compatible with 1:1 and 1:2 mix ratio products.

    ?Provides a convenient, cost-effective method to apply product with minimal waste. Compatible with 1:1 and 1:2 mix ratio products.

  • High mechanical advantage (greatly improved ergonomics vs finer squeezing the tube) Smooth consistent flow output Accurate positioning of nozzle for accurate beads.

    High mechanical advantage (greatly improved ergonomics vs finer squeezing the tube) Smooth consistent flow output Accurate positioning of nozzle for accurate beads.

  • Gasket Eliminator Flange Sealant High temperature. Product has a temperature range to 400 °F (204 °C) with excellent solvent and chemical resistance. Makes or dresses gaskets in rigid assemblies. Eliminates gasket compression set.

    Gasket Eliminator Flange Sealant High temperature. Product has a temperature range to 400 °F (204 °C) with excellent solvent and chemical resistance. Makes or dresses gaskets in rigid assemblies. Eliminates gasket compression set.

  • Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTITE® 7649 Primer N on only one surface. NFS® /ANSI 61 Certified. Agriculture Canada Approved.

    Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTITE® 7649 Primer N on only one surface. NFS® /ANSI 61 Certified. Agriculture Canada Approved.

  • Gasket Eliminator Flange Sealant Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTITE® 7649 Primer N on only one surface.

    Gasket Eliminator Flange Sealant Recommended for use on rigid iron, steel and aluminum flanges. Spray LOCTITE® 7649 Primer N on only one surface.

  • Grey RTV Silicone For rigid assemblies. Excellent fluid resistance. Medium Modulus, low elongation, for low relative joint movement. Non-corrosive to aluminum, iron and steel. Low odor, low volatility. 

    Grey RTV Silicone For rigid assemblies. Excellent fluid resistance. Medium Modulus, low elongation, for low relative joint movement. Non-corrosive to aluminum, iron and steel. Low odor, low volatility. 

  • High Performance All types of flanges including stamped sheet metal. Designed for superior bonding properties to oil contaminated metals.

    High Performance All types of flanges including stamped sheet metal. Designed for superior bonding properties to oil contaminated metals.

  • Designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.

    Designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.

  • For close-fitting parts with light contamination. Typical applications include retaining roller bearings or oil impregnated bushings into housings.

    For close-fitting parts with light contamination. Typical applications include retaining roller bearings or oil impregnated bushings into housings.

  • General Purpose Retaining Compound Recommended for parts that will need subsequent dismantling, i.e retention of bearings onto shafts and into housings.

    General Purpose Retaining Compound Recommended for parts that will need subsequent dismantling, i.e retention of bearings onto shafts and into housings.

  • Recommended for high temperature retaining of parts with a clearance of interference fl1 i.e retaining bushes, bearings, seals, fans and liners.

    Recommended for high temperature retaining of parts with a clearance of interference fl1 i.e retaining bushes, bearings, seals, fans and liners.

  • Maximum strength. For use where high dynamic force or cyclic loading is expected. Offers high temperature performance and oil tolerance.

    Maximum strength. For use where high dynamic force or cyclic loading is expected. Offers high temperature performance and oil tolerance.

  • LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention...

    LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention...

  • Press Fit/High Strength/Rapid Cure. Offers high temperature performance and oil tolerance.

    Press Fit/High Strength/Rapid Cure. Offers high temperature performance and oil tolerance.