RS PRO Solder Sucker, 190 mm Length

The RS Pro Solder Sucker de-soldering gun is a standard anti-static model, hand operated tool. The solder sucker is a professional and quality tool used to cleanly remove solder plus providing joint dis-assembly. To assist you in removing solder the solder sucker picks up the debris by sucking it up via a spring-loaded piston, released by a push button and re-primed by a plunger. Extraction springs are located outside the vacuum chamber and this helps to prevent the solder sticking and prolongs the life of the solder sucker. This RS PRO model has a PTFE nozzle which is carbon impregnated and the main body of the de-soldering gun is made from polished aluminium. The polished aluminium body provides conduction from the desoldering point though to yourself.

• Solder sucker, desoldering gun.
• Anti-Static standard model.
• Hand operated.
• Provides efficient solder removal and joint dis-assembly.
• Fast sucking action via the spring loaded piston.
• Extraction springs are outside of the vacuum chamber.
• Prevents solder sticking.
• PTFE Nozzle (polytetrafluoroethylene), carbon impregnated.
• Main body made from polished aluminium (providing conduction from the tip).

• Insulates.
• Resistant to wear.
• Less friction.
• Used with high temperatures.
• Chemically resistant.

PTFE – Polytetrafluoroethylene. A very stable material used in various industries and applications. A stable and hard wearing material.

• Heat up the solder to be removed with your soldering iron.
• Press the plunger of the solder sucker.
• Place to desoldering pump against the solder to be removed.
• The piston will then suck up the solder to be removed.
• Repeat all of the above as many times as required.
• When finished remove and dispose of the waste solder from the pump.

• Length 190 mm.
• Barrel diameter 20 mm.
• Nozzle length 20 mm.
• Tip outside dimeter 3 mm.
• Tip inside diameter 1.5 mm.
• Weight 59 g.

Desoldering Tool Type: Solder Sucker
Overall Length: 190 mm