Tape Primer 94, (Light Yellow) 1/2 Pint Can, 3M for increasing adhesion of film and vinyl graphics in automotive detailing

Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
Dries to a clear finish
Cleans up with isopropyl alcohol
3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

Dries in Minutes for Efficient Use
Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over-applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying the tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat.

Recommended Applications

Promote adhesion of 3M™ VHB™ Tape
For use on many plastics, rubber painted and bare metal substrates
Application Tips
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller, or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.
Adhesive Type: General Purpose Acrylic Adhesive
Application Temperature-Environment (Metric): 15°C - 27°C
Brand: 3M™
Clean-up: Acetone Solvent
Composition: Solvent Based
Full Cure : 2 min
Industries: General Industrial, Transportation
National Stock Number: 8040014983919
Net Weight (Metric): 0.27 kg
Overall Height (Metric): 7.3 cm
Physical Form: Liquid
Product Form: Can, Each
Product Type: Primer
Regulatory Key: AD-02765
Shelf Life in Months (from date of manufacture): 18
Storage Temperature: 60°F - 80°F
Storage Temperature (Celsius): 15°C - 27°C
Surface Type: Plastic
Volume (metric): 236 mL