Phoenix Contact, AI0.75-10 GY Insulated Crimp Bootlace Ferrule, 10mm Pin Length, 1.3mm Pin Diameter, 0.75mm² Wire Size,

Insulated Bootlace Ferrules AI Series - Phoenix Contact

Phoenix contact provides you with a range of great insulated ferrules that can be crimped onto the end of a cable or wire to give your connection more stability and prevention from fraying. These bootlace crimp ferrules are made from a soft tin-plated electrolytic copper and have a soft plastic cover to further enhance the connection and prevention of fraying. Designed with safety in mind, they're free from any silicone and halogen.

Features and benefits:

Insulatedrevent splicing of wires to ensure a stable connection over the long term

No need for soldering, a crimping tool is all that is required to fit the ferrules (see below for tools)

Reliability of close connections is massively increased

Maximum operating temperature of 105°C so can be used in harsh conditions

How to crimp a bootlace ferrule?

Ferrules are simple and easy to install. Firstly, they're mounted to the end of a stripped cable and are simply compressed onto the cable (typically with a tool) to form a tight and sturdy fit onto a cable. Once they're crimped onto the cable, give a gentle tug to ensure it is tight. Once you're sure it is tight, you can then proceed to mate your wire with connector.

What are bootlace ferrules used for?

Bootlace ferrules are used to help prevent the cable splicing or fraying when a connection is made. Typically the terminal blocks use a screw-connection, so if you have a bootlace ferrule mounted on your wire, this allows the screw to make a better bond rather than a few strands of metal cable. Not to mention, installing a bootlace ferrule ensures your connection is easier to install and remove.

Compatible hand tools:

Plier Crimper - 0.25mm² to 6mm²: 803-4405

Plier Crimper - 0.5mm² to 6mm²: 803-4427

Plier Crimper - 0.25mm² to 6mm²: 803-4411

Plier Crimper - 0.14mm² to 10mm²: 803-4420

Phoenix Contact Crimp Bootlace Ferrule, Single-Entry, 0.25mm Insulating Collar Thickness - AI 0,75-10 GY - 3201288

Make quick work of securing a cable to a screw or spring clamp using this crimp bootlace ferrule from Phoenix Contact. You simply insert the stripped end of your wire into the metal sleeve and use a crimping tool to fix it in place.

The sleeve is made from tin-plated electrolytic copper, which is highly conductive and supports fast transmission. With the plastic collar serving as an insulating jacket, you can rest assured you're safe from electric shocks.

As this ferrule's free from silicone and halogen, it won't release toxic contaminants that damage sensitive electrical components in your panel. The grey colour of the jacket means you can colour-code it for a specific job and spot it quickly in a crowded setup.

Features & Benefits

• Compact dimensions of 16 (L) x 1.3mm (W) take up minimal space

• UL 94-HB flammability rating means it burns slowly, helping to stop a fire from spreading

• Sleeve wall thickness of 0.15mm protects the conductor from impacts

• Tin-plated copper sleeve resists corrosion in humid settings

Maximum Wire Size mm²: 0.75mm²

Pin Diameter: 1.3mm

Number of Entries: 1

Insulation Material: Plastic

Colour: Grey

Pin Length: 10mm

Insulation: Insulated

Maximum Wire Size AWG: 18AWG

Overall Length: 16mm

Series:AI0.75-10 GY